Home » » 2.4.1.2 Packet Tracer - Skills Integration Challenge

2.4.1.2 Packet Tracer - Skills Integration Challenge

Posted by Soni Setiawan on Wednesday, 7 October 2015

2.4.1.2 Packet Tracer - Skills Integration Challenge

Objectives

Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).
Use Cisco IOS commands to specify or limit access to the device configurations.
Use IOS commands to save the running configuration.
Configure two host devices with IP addresses.
Verify connectivity between the two PC end devices.
 
Scenario
As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.

Requirements
Use a console connection to access each switch.
Name Class-A and Class-B switches.
Use the xAw6k password for all lines.
Use the 6EBUp secret password.
Encrypt all clear text passwords.
Include the word warning in the message-of-the-day (MOTD) Banner.
Configure addressing for all devices according to the Addressing Table.
Save your configurations.
Verify connectivity between all devices.
Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.


Switch Class-A
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Class-A
Class-A(config)#line console 0
Class-A(config-line)#password xAw6k
Class-A(config-line)#login
Class-A(config-line)#exit
Class-A(config)#line vty 0
Class-A(config-line)#password xAw6k
Class-A(config-line)#login
Class-A(config-line)#exit
Class-A(config)#enable secret 6EBUp
Class-A(config)#service password-encryption
Class-A(config)#banner motd &
Enter TEXT message. End with the character '&'.
Warning..!! Authorized Access Only! &

Class-A(config)#interface vlan 1 Class-A(config-if)#ip add 128.107.20.10 255.255.255.0
Class-A(config-if)#no shutdown
Class-A(config-if)#end
Class-A#copy running-config startup-config


Switch Class-B
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Class-B
Class-B(config)#line console 0
Class-B(config-line)#password xAw6k
Class-B(config-line)#login
Class-B(config-line)#exit
Class-B(config)#line vty 0
Class-B(config-line)#password xAw6k
Class-B(config-line)#login
Class-B(config-line)#exit
Class-B(config)#enable secret 6EBUp
Class-B(config)#service password-encryption
Class-B(config)#banner motd &
Enter TEXT message. End with the character '&'.
Warning..!! Authorized Access Only! &

Class-B(config)#interface vlan 1 
Class-B(config-if)#ip add 128.107.20.15 255.255.255.0
Class-B(config-if)#no shutdown
Class-B(config-if)#end
Class-B#copy running-config startup-config

Konfigurasi PC Student-1

2.4.1.2 Packet Tracer - Skills Integration Challenge
Student-1

Konfigurasi PC Student-2
2.4.1.2 Packet Tracer - Skills Integration Challenge
Student-2





Terima kasih sudah membaca. Salam, Soni Setiawan

Previous
« Prev Post

1 comments: